CG-FXII Series:
CG-FXII Plus Series:
Continuous Mark Detect
Half Cut
Over Cut
Zero Margin Mark
ID Cut
| Type | Roll-based cutting plotter |
| Maximum Media Width | CG-130FXII: 62.2″ (1580 mm) |
| Cutting Width | CG-130FXII: 51.2″ (1300 mm) |
| Maximum media thickness | Recommended sheets up to 0.01″ (.25mm) including laminate and liner; Up to 0.04″ (1mm) max (results may vary) |
| Maximum Cut Speed | CG-SRIII Series: 27.6″ (700 mm) |
| Moving speed second | CG-SRIII Series: 39.4″ (1000 mm) |
| Maximum Cut pressure (Metric grams) | 500g |
| Adjustable speed range | CG-SRIII Series: |
| Cutter Types | Eccentric cutter, Blade for small character, Blade for reflective sheet, Blade for fluorescent sheet, Blade for PVC with low-pressure, Ball point pen. |
| Mechanical resolution | CG-SRIII Series: X direction: 2.5 μm; Y direction 5 μm |
| Program steps | CG-SRIII Series: 25 μm or 10 μm (MGL-IIc); 100 μm, 50 μm (MGL-Ic1) |
| Repeatability | CG-SRIII Series: +/- 0.2 mm / 2 M |
| Downforce pressure | CG-SRIII Series: |
| Command | CG-SRIII Series: MGL-IIc, MGL-Ic1 |
| Interface | USB2.0, RS-232C, Ethernet |
| Receive buffer | CG-SRIII Series: 27MB standard, 17MB when sorting |
| Power supply | CG-60SRIII: Single-phase (AC 100–120V / AC 220–240V) |
| Power consumption | 145 VA or less |
| Operational Environment | Operational Temperature 41° – 95° F |
| Dimensions (W × D × H) | CG-60SRIII: 40.6″ x 16.9″ x 13.2″ (103.1 x 42.9 x 33.5 cm) |
| Weight | CG-60SRIII: 52.9 lbs. (24 kg) |
